|
Instructions:::
This
application was created as an experiment in photo montage using Flash.
The program uses 240 images to create one composite image of the Arapahoe
National Forest in Summit County Colorado. The 240 images are photographs
I took along the Loveland Pass Highway. The application attempts to
recreate the Mountain Range using user defined settings.
| The
user defined parameters are set using the Text Box and Shape Selectors
shown above. These are positioned along the path to the top of
the mountain seen in the main interface. Text number in the text
box can be changed to set the number of photographs taken at each
location along the path to the top. The Shape Selectors determine
the shape of the pictures used from each location. The application
will randomly determine the placement best suited for each picture.
The number of pictures and the shape Selection can be set for
each of the 7 locations. The location determine placement of the
images. Pictures taken at locations near the top of the pass represent
higher elevation photographs. Pictures Taken near the bottom of
the pass represent lower elevation images. The final image created
represents a perspective from the bottom of the Mountain Range
looking up. So Lower elevation Images overlap higher elevation
images. |
|
|
|
